【耐火材料网】
|
序号 |
标准号 |
标准名称 |
|
基础标准（28项） |
||
|
1 |
ISO 836:2001 |
Terminology for refractories耐火材料术语 |
|
2 |
ISO 1146:1988 |
Pyrometric reference cones for laboratory use-Specification 实验室用标准测温锥-技术条件 |
|
3 |
ISO 1927-1:2012 |
Monolithic（Unshaped） refractory products- Part 1: Introduction and classification 不定形耐火材料-第1部分：介绍及分类 |
|
4 |
ISO 1927-2:2012 |
Monolithic（Unshaped） refractory products- Part 2: Sampling for testing 不定形耐火材料-第2部分：抽样验收 |
|
5 |
ISO 1927-3:2012 |
Monolithic（Unshaped） refractory products- Part 3: Characterization as received 不定形耐火材料-第3部分：接收试样的特征 |
|
6 |
ISO 1927-4:2012 |
Monolithic（Unshaped） refractory products- Part 4: Determination of consistency of castables 不定形耐火材料-第4部分：浇注料稠度的测定 |
|
7 |
ISO 1927-5:2012 |
Monolithic（Unshaped） refractory products- Part 5: Preparation and treatment of test pieces 不定形耐火材料-第5部分：试样制备和预处理 |
|
8 |
ISO 1927-6:2012 |
Monolithic（Unshaped） refractory products- Part 6: Measurement of physical properties 不定形耐火材料-第6部分：物理性能的测试 |
|
9 |
ISO 1927-7:2012 |
Monolithic（Unshaped） refractory products- Part 7: Tests on pre-formed shapes 不定形耐火材料-第7部分：预制件的测试 |
|
10 |
ISO 1927-8:2012 |
Monolithic（Unshaped） refractory products- Part 8: Determination of complementary properties 不定形耐火材料-第8部分：其他性能的测试 |
|
11 |
ISO 2245:2006 |
Shaped insulating refractory products-classification 定形隔热耐火制品-分类 |
|
12 |
ISO 5019-1:1984 |
Refractory bricks-Dimensions-Part 1: Rectangular bricks 耐火砖-尺寸 第一部分：直形砖 |
|
13 |
ISO 5019-2:1984 |
Refractory bricks-Dimensions-Part 2: Arch bricks耐火砖-尺寸 第二部分：楔形砖 |
|
14 |
ISO 5019-3:1984 |
Refractory bricks-Dimensions-Part 3: Rectangular checker bricks for regenerative furnace 耐火砖-尺寸 第三部分：蓄热室用直形格子砖 |
|
15 |
ISO 5019-4:1988 |
Refractory bricks-Dimensions-Part 4: Dome bricks for electric arc furnace roofs 耐火砖-尺寸 第四部分：电弧炉炉顶用球顶砖 |
|
16 |
ISO 5019-5:1984 |
Refractory bricks-Dimensions-Part 5: Skewbacks耐火砖-尺寸 第五部分：拱脚砖 |
|
17 |
ISO 5019-6:2005 |
Refractory bricks-Dimensions-Part 6: Basic bricks for oxygen steel-making converters耐火砖-尺寸 第六部分：氧化炼钢转炉用碱性砖 |
|
18 |
ISO 5022:1979 |
Shaped refractory products-Sampling and acceptance testing定形耐火制品-抽样及验收检验 |
|
19 |
ISO 5417:1986 |
Refractory bricks for use in rotary kilns-Dimensions回转窑用砖-尺寸 |
|
20 |
ISO 8656-1:1988 |
Refractory products-Sampling of raw materials and unshaped products-Part 1: Sampling scheme耐火制品-耐火原料和不定形耐火材料抽样第一部分：抽样方案 |
|
21 |
ISO 9205:1988 |
Refractory bricks for use in rotary kilns- hot- face identification marking 回转窑用耐火砖-热面标记 |
|
22 |
ISO 10080:1990 |
Refractory products-Classification of dense ,shaped acid-resisting products 耐火制品-致密定形耐酸制品的分类 |
|
23 |
ISO 10081-1:2003 |
Classification of dense ,shaped refractory products-Part 1:Alumina-silica 致密定形耐火制品的分类 第一部分：铝硅质耐火制品 |
|
24 |
ISO 10081-2:2003 |
Classification of dense ,shaped refractory products-Part 2: Basic products containing less than 7% residual carbon致密定形耐火制品的分类 第二部分：残炭量小于7%的碱性耐火制品 |
|
25 |
ISO 10081-3:2003 |
Classification of dense ,shaped refractory products-Part 3: Basic products containing from 7% to 50% residual carbon致密定形耐火制品的分类 第三部分：残炭量7%-50%的碱性耐火制品 |
|
26 |
ISO 10081-4:2014 |
Classification of dense ,shaped refractory products-Part 4: Special products致密定形耐火制品的分类 第四部分：特殊制品 |
|
27 |
ISO 12678-1:1996 |
Refractory products-Measurement of dimension and external defects of refractory bricks-part 1: Dimension and conformity to drawings耐火制品-耐火砖尺寸和外观缺陷的检验 第一部分：实际尺寸与设计图纸尺寸的一致性 |
|
28 |
ISO 12678-2:1996 |
Refractory products-Measurement of dimension and external defects of refractory bricks-part 2: Corner and edge defects and other surface imperfections 耐火制品-耐火砖尺寸和外观缺陷的检验 第二部分：边角缺陷及其他表面缺陷 |
|
物理实验方法标准（38项） |
||
|
29 |
ISO 528:1983 |
Refractory products-Determination of refractoriness 耐火制品-耐火度的测定 |
|
30 |
ISO 1893:2007 |
Refractory products-Determination of refractoriness under load-differential method with rising temperature 耐火制品-荷重软化温度的测定(示差-升温法) |
|
31 |
ISO 2477:2005 |
Shaped insulating refractory products-determination of permanent change in dimensions on heating 定形隔热耐火制品-加热永久线变化的测试 |
|
32 |
ISO 2478:1987 |
Dense shaped refractory products-determination of permanent change in dimensions on heating 致密定形耐火制品-加热永久线变化的测试 |
|
33 |
ISO 3187:1989 |
Refractory products-Determination of creep in compression 耐火制品-压蠕变的测定 |
|
34 |
ISO 5013:1985 |
Refractory products-Determination of modulus of rupture at elevated temperature 耐火制品-高温抗折强度的测定 |
|
35 |
ISO 5014:1997 |
Dense and insulating shaped refractory products-Determination of modulus of rupture at ambient temperature 致密和隔热耐火制品-常温抗折强度的测定 |
|
36 |
ISO 5016:1997 |
Shaped insulating refractory products-Determination of bulk density and true porosity定形隔热耐火制品-体积密度和真气孔率的测试 |
|
37 |
ISO 5017:2013 |
Dense shaped refractory products-Determination of bulk density ,apparent porosity and true porosity致密定形耐火制品-体积密度、显气孔率和真气孔率的测试 |
|
38 |
ISO 5018:1983 |
Refractory materials-determination of true density耐火材料-真密度的测定 |
|
39 |
ISO 8840:2021 |
Refractory materials-determination of bulk density of granular materials 耐火材料-颗粒材料体积密度的测定 |
|
40 |
ISO 8841:1991 |
Dense shaped refractory products-Determination of permeability to gases 致密定形耐火制品-透气度的测定 |
|
41 |
ISO 8890:1988 |
Dense shaped refractory products-Determination of resistance to sulfuric acid 致密定形耐火制品-抗硫酸侵蚀性的测定 |
|
42 |
ISO 8894-1：2010 |
Refractory materials-Determination of thermal conductivity-Part 1：Hot-wire methods（cross-array and resistance thermometer） 耐火材料-导热系数的测定 第1部分：十字热线法和电阻温度计法 |
|
43 |
ISO 8894-2:2007 |
Refractory materials-Determination of thermal conductivity-Part 2：Hot-wire method（parallel） 耐火材料-导热系数的测定 第二部分：平行线法 |
|
44 |
ISO 8895:2004 |
Shaped insulating refractory products-Determination of cold crushing strength 定形隔热耐火制品-常温耐压强度的测定 |
|
45 |
ISO 10059-1:1992 |
Dense shaped refractory products-Determination of cold compressive strength Part 1: Referee test without packing 致密定形耐火制品-常温耐压强度的测定 第一部分：无衬垫仲裁法 |
|
46 |
ISO 10059-2:2003 |
Dense shaped refractory products-Determination of cold compressive strength Part 2: Test with packing 致密定形耐火制品-常温耐压强度的测定 第二部分：衬垫法 |
|
47 |
ISO 10060:1993 |
Dense shaped refractory products-test methods for products containing carbon 致密定形耐火制品-含碳制品试验方法 |
|
48 |
ISO 10635:1999 |
Refractory products-methods of test for ceramic fiber products 耐火制品-陶瓷纤维制品试验方法 |
|
49 |
ISO 12676:2000 |
Refractory products-Determination of resistance to carbon monoxide 耐火制品-抗一氧化碳性能的确定 |
|
50 |
ISO 12680-1:2005 |
Methods of test for refractory products-Part 1：Determination of dynamic Young,s modulus by impulse excitation of vibration耐火材料试验方法-第一部分：脉冲激发振动法测定杨氏模量 |
|
51 |
ISO 13765-1:2004 |
Refractory mortars-Part 1: Determination of consistency using the penetrating cone method耐火泥浆 第一部分：针入度法测定稠度 |
|
52 |
ISO 13765-2:2004 |
Refractory mortars-Part 2: Determination of consistency using the reciprocating flow table method耐火泥浆 第二部分：流动法测定稠度 |
|
53 |
ISO 13765-3:2004 |
Refractory mortars-Part 3: Determination of joint stability耐火泥浆 第三部分：粘结稳定性（粘结时间）的测定 |
|
54 |
ISO 13765-4:2004 |
Refractory mortars-Part 4: Determination of flexural bonding strength 耐火泥浆 第四部分：抗折粘结强度的测定 |
|
55 |
ISO 13765-5:2004 |
Refractory mortars-Part 5: Determination of grain size distribution(sieve analysis)耐火泥浆 第五部分：粒度分布（筛分析）的测定 |
|
56 |
ISO 13765-6:2004 |
Refractory mortars-Part 6: Determination of moisture content of ready-mixed mortars耐火泥浆 第六部分：湿态成品泥浆含水量的测定 |
|
57 |
ISO 13765-7:2021 |
Refractory mortars - Part 7: Determination of permanent change in dimensions on heating 耐火泥浆 第七部分：加热永久线变化率试验方法 |
|
58 |
ISO 16282:2007 |
Dense shaped refractory products-Determination of resistance to abrasion at ambient temperature 致密定形耐火制品 常温耐磨试验方法 |
|
59 |
ISO 16334:2013 |
Monolithic refractory products -- Determination of resistance to explosive spalling 不定形耐火制品 抗爆裂性试验方法 |
|
60 |
ISO 16349:2015 |
Refractory materials -- Determination of abrasion resistance at elevated temperature 耐火材料 高温耐磨性试验方法 |
|
61 |
ISO 16835:2014 |
Refractory products -- Determination of thermal expansion 耐火制品 热膨胀性试验方法 |
|
62 |
ISO 18886:2016 |
Refractory test-piece preparation - Gunning refractory panels by wet gunning techniques 耐火材料试样的制备-采用气动-湿法喷补方法制备耐火喷射料大样 |
|
63 |
ISO 20182:2008 |
Refractory test-piece preparation-Gunning refractory panels by the pneumatic-nozzle mixing type guns 耐火材料试样的制备-采用气动-喷嘴混合型喷射方法制备耐火喷射料大样 |
|
64 |
ISO 21736:2020 |
Refractories - Test methods for thermal shock resistance 耐火材料 抗热震性试验方法 |
|
65 |
ISO 22605:2020 |
Refractories - Determination of dynamic Young's modulus (MOE) at elevated temperatures by impulse excitation of vibration 耐火材料 高温杨氏模量试验方法（脉冲激振法） |
|
66 |
ISO 22685:2021 |
Refractory products - Determination of compressive strength at elevated temperature 耐火材料 高温耐压强度试验方法 |
|
化学分析方法标准（25项） |
||
|
67 |
ISO 10058-1:2008 |
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica菱镁矿和白云石耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）-第一部分：仪器、试剂、溶样及重量法测定二氧化硅 |
|
68 |
ISO 10058-2:2008 |
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis菱镁矿和白云石耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）-第二部分：湿法化学分析 |
|
69 |
ISO 10058-3:2008 |
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry菱镁矿和白云石耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）-第三部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
70 |
ISO 12677:2011 |
Chemical analysis of refractory products by XRF-Fused cast bead method 耐火制品X-射线荧光化学分析（玻璃样片法） |
|
71 |
ISO 14719:2011 |
Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3++ by the spectral photometric method with 1,10-phenanthroline 耐材、玻璃和釉料化学分析方法-二氮杂菲分光光度法测定二价和三价铁离子 |
|
72 |
ISO 14720-1:2013 |
Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials -Part 1:Infrared measurement methods 陶瓷原料与碱性材料-粉末与颗粒状非氧化性陶瓷原料与碱性材料硫含量的测定-第1部分 感应炉熔融后红外测试法 |
|
73 |
ISO 14720-2:2013 |
Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials -Part 2:Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow 陶瓷原料与碱性材料-粉末与颗粒状非氧化性陶瓷原料与碱性材料硫含量的测定-第2部分 氧气中燃烧后，ICP OES或IC 测试法 |
|
74 |
ISO 16169-2018 |
Preparation of silicon carbide and similar materials for analysis by ISO 12677 X-ray fluorescence (XRF) - Fused cast-bead method 利用ISO 12677 X射线荧光化学分析（熔铸玻璃片法）制备碳化硅及相似物质 |
|
75 |
ISO 20565-1:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica 含铬耐火制品和含铬原料化学分析方法（可与X射线荧光法并行使用的另一种方法）-第一部分：仪器、试剂、溶样及重量法测定二氧化硅 |
|
76 |
ISO 20565-2:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis含铬耐火制品和含铬原料化学分析方法（可与X射线荧光法并行使用的另一种方法）-第二部分：湿法化学分析 |
|
77 |
ISO 20565-3:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry含铬耐火制品和含铬原料化学分析方法（可与X射线荧光法并行使用的另一种方法）-第三部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
78 |
ISO 21068-1:2008 |
Chemical analysis of silicon-carbide -containing raw materials and refractory products-Part 1: General information and sample preparation 含碳化硅原料及耐火制品的化学分析方法-第一部分：总则及制样 |
|
79 |
ISO 21068-2:2008 |
Chemical analysis of silicon-carbide -containing raw materials and refractory products-Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide ,total and free silica and total and free silicon 含碳化硅原料及耐火制品的化学分析方法-第二部分：酌减、总碳、游离碳和碳化硅、总游离二氧化硅及游离二氧化硅、总游离硅及游离硅的测定 |
|
80 |
ISO 21068-3:2008 |
Chemical analysis of silicon-carbide -containing raw materials and refractory products-Part 3: Determination of nitrogen, oxygen, metallic and oxidic constituents 含碳化硅原料及耐火制品的化学分析方法-第三部分：氮、氧、金属成分及氧化物的测定 |
|
81 |
ISO 21078-1:2008 |
Determination of boron oxide in refractory products-Part 1: Determination of total boron oxide in oxidic materials for ceramics, glass and glazes耐火制品中B2O3的测定-第一部分：陶瓷、玻璃和釉料用氧化物材料中B2O3总量的测定 |
|
82 |
ISO 21078-2:2006 |
Determination of boron oxide in refractory products-Part 2: Acid extraction method of determination of boron oxide in binder 耐火制品中B2O3的测定-第二部分：酸萃取法测定结合剂中的B2O3 |
|
83 |
ISO 21079-1:2008 |
Chemical analysis of refractories containing alumina, zirconia and silica-Refractories containing from 5% to 45% of ZrO2 (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution含氧化铝、氧化锆、氧化硅耐火材料化学分析方法-含氧化锆5%-45%的耐火材料（可与X射线荧光法并行使用的另一种方法）-第一部分：仪器、试剂、溶样 |
|
84 |
ISO 21079-2:2008 |
Chemical analysis of refractories containing alumina, zirconia and silica-Refractories containing from 5% to 45% of ZrO2 (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis含氧化铝、氧化锆、氧化硅耐火材料化学分析方法-含氧化锆5%-45%的耐火材料-第二部分：湿法化学分析 |
|
85 |
ISO 21079-3:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry含氧化铝、氧化锆、氧化硅耐火材料化学分析方法-含氧化锆5%-45%的耐火材料-第三部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
86 |
ISO 21587-1:2007 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica 铝硅酸盐耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）-第一部分：仪器、试剂、溶样及重量法测定二氧化硅 |
|
87 |
ISO 21587-2:2007 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis铝硅酸盐耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）-第二部分：湿法化学分析 |
|
88 |
ISO 21587-3:2007 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry铝硅酸盐耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）-第三部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
89 |
ISO 22016-2015 |
Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods 耐火原料和制品-重量滴定法测硫含量 |
|
90 |
ISO 26845:2008 |
Chemical analysis of refractories-General requirement for wet chemical analysis, atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrophotometry methods耐火材料化学分析方法-湿法化学分析、原子吸收光谱及感应耦合等离子原子发射光谱法的一般技术条件 |
|
91 |
ISO 23071:2021 |
Refractory products - Determination of reduced species in carbon containing refractories by XRD XRD测定含碳耐火材料化学分析方法 |
|
其他（技术指南和技术勘误表） |
||
|
92 |
ISO 10081-2:2003/Cor 1:2008 |
Classification of dense ,shaped refractory products-Part 2: Basic products containing less than 7% residual carbon-Technical Corrigendum致密定形耐火制品的分类 第二部分：残炭量小于7%的碱性耐火制品 技术勘误表 |
|
93 |
ISO/TR 21828:2010 |
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products 不定形耐火材料制备与试验技术指南 |
